Инструкция по сборке аппаратного комплекса TMAS-1.0 для автоматизации (Страница 76 из 117)

C:\Users\vinbr>cd C:\

C:\>java -jar ast.jar

Test Tool Started
Java version in use: 1.8.0_151

Following usable ports available in your system.
Pick the one where Arduino board is connected:

0) COM5
1) COM8
2) Quit

Please enter from 0 to 1 or 2 to exit...
> 0
Ok, selected port: COM5
Proceeding with the tests...

Opening port COM5... OK
Configuring port with 38400,8,N,1... OK
Sending Status Check command... OK
Waiting for responce... OK
Checking if Arduino already initialized... NO
Sending Init Board command... OK
Waiting for responce... OK
Arduino board initiated: true
Pressure sensor detected: false
Sending Get Addresses for all Probes command... OK
Waiting for responce...

Found 1 probes in the network:
28FF406C82160429


Sending Check Parasite Powered probes command... OK
Waiting for responce... OK
Parasite powered devices detected: no
Sending Start Temperature Polling command (2 sec interval)... OK
Waiting for responce... OK
Waiting for 6 sec to allow Temperature reports to arrive...
Seq [1] for device DCFCFD73F1EFF765 temp: 3359.1875
Seq [2] for device DCFCFD73F1EFF765 temp: 3359.1875
Seq [3] for device DCFCFD73F1EFF765 temp: 3359.1875
Sending Change Temperature Polling Params command (1 sec interval)... OK
Waiting for responce... OK
Waiting for 6 sec to allow Temperature reports to arrive...
Seq [4] for device DCFCFD73F1EFF765 temp: 3359.1875
Seq [5] for device 28FF406C82160429 temp: 4095.9375
Seq [6] for device 28FF406C82160429 temp: 4095.9375
Seq [7] for device 28FF406C82160429 temp: 4095.9375
Seq [8] for device 28FF406C82160429 temp: 4095.9375
Seq [9] for device 28FF406C82160429 temp: 4095.9375
Sending Change Temperature Polling Params command (0.5 sec interval)... OK
Waiting for responce... OK
Waiting for 6 sec to allow Temperature reports to arrive...
Seq [10] for device 28FF406C82160429 temp: 4095.9375
Seq [11] for device 28FF406C82160429 temp: 85.0
Seq [12] for device 28FF406C82160429 temp: 85.0
Seq [13] for device 28FF406C82160429 temp: 85.0
Seq [14] for device 28FF406C82160429 temp: 85.0
Seq [15] for device 28FF406C82160429 temp: 85.0
Seq [16] for device 28FF406C82160429 temp: 85.0
Seq [17] for device 28FF406C82160429 temp: 85.0
Seq [18] for device 28FF406C82160429 temp: 85.0
Seq [19] for device 28FF406C82160429 temp: 85.0
Sending Board Shut Down command... OK
Waiting for responce... OK
Shutdown of device successful!
Test Tool Exit - Port closed.

C:\>